Saw blades are one of the most crucial components of a table saw. It comes in various sizes depending on the model. After a certain time, you need to change your table saw blades. If you use the table broadly, then the saw blade can loosen the sharpness and ripping capacity as well. So you are a professional, then you must change the table saw blade to get the maximum performance with the table saw.

There are some essential components required for changing the table saw blade, for example, screw driver, wrench and a small piece of wood. Most importantly, you must need a new table saw blade which you would like to replace with the old and dull one. 

The Process Of Changing The Table Saw Blades 

You can easily change the table saw blades by taking the following steps.

Rooring PPC Marketing

Step 1: Turn off the power

Turn off the saw by placing the power switch on the table saw. For safety reasons, unplug the power cord to completely disconnect the saw from the power supply. Take some time to make sure that the table saw is fully out of power.

Step 2 – Displace the blade plate

First of all, you need to displace the blade plate from the table saw. For most table saw models, the leaf plate is the metal plate located on the top of the table saw.

Most blades are attached with at least a couple of screws. One of the screws is fitted with in the front and another one in the back. So you need to loosen these screws in order to remove the blade plate from the table saw. After removing the blade plate, set the plate aside.

Step 3 – Displace the blade

Want to change the table saw blade? Well, you  must have to displace the blade from the table saw. Do not forget to place a piece of wood with respect to the blade for preventing mishap.

Rooring PPC Marketing

After placing a wood piece against the blade, you have to displace the nut by using a wrench for removing the blade.

After displacing the blade, set it aside while working.

Step 4 – Install a new blade

Insert the saw blade with the blade teeth forward into the saw blade housing. Wash the new plate with finish. Then you need to set it at the right approach on the table saw. After that, you have to tighten the saw blade by using a wrench. In this case, you also need to place a piece of wood with respect to the saw blade for preventing accidental matter. 

Step 5 – Replace the blade plate

Rooring PPC Marketing

After successfully installing a new blade, you also need to replace the blade plate by tightening the screws with a powerful screwdriver. Then it will be set on the top of the table saw. 

Step 6 – Reconnect the power

Reconnect the table saw to the power outlet to restore power for test purpose. Then turn on the table saw and make sure that the saw blade is installed properly and working efficiently.


Undoubtedly, safety would be the main concern for you. If you have any safety concerns with this regards, then do not do it yourself. Then you can hire a professional mechanic  to change your table saw blades.


As a civil engineer and roofer, I love to share the experience that I have gained through the last couple of years. In the roofing industry, practical experience is a very crucial fact that can help you a lot. Hence, I want to help you with my blog.

Write A Comment