You know there are many guides about how to cut a taper on a table saw. But where to get an exact tapered guide to build a furniture-making career.

Don’t be upset. You just search for your requirements. And then, we have listed here some effective steps for you. 

The special benefits of this process are fast configuration, zero cost, versatility, quick and stable. 

Rooring PPC Marketing

However, if you search here for various cutting processes, then you’ve landed in the wrong place. 

Importantly, it is only a platform where you will get information based on tapered cuts.   

The List of  How To Cut A Taper On A Table Saw

It can be an extremely easy task with the use of the best table saw. The table saw is considered as the most popular power tool in the wood industries. Especially, the table saw is also used all over the world for cutting tapers. 

Installing the blade protector

Mount the blade protector that came with the saw. And then, you can change the height of the blade so that you can cut wood based on your requirements.

In addition, The table saw comes with a blade guard system that contains a splitter and pawl to prevent kick-back. Identically, you can abandon the old blades guard system and reinstall it by following the user manual.

It’s very important when you cut a taper on a table saw. Furthermore, the rubber guard saves your hands by holding the knife far away. The splitter of the table saw that holds the deck from pinching the knife. 

Rooring PPC Marketing

Surprisingly, you will get the kickback pawl protective unit. It has small teeth that can catch the board. It also has the ability to prevent you from injury when the knife pinches or connects during the slice.

Use Push Stick 

You should be concentrated on securing the board edge when the table saw the fence move it through slowly.  And then, you always move carefully aside in case it kicks-back out of the saw. 

Therefore, you just use a push stick for plywood. But you never use a push stick for lumber because it can break accidentally. It is very essential to use a push stick whenever you cut a taper on a table saw.  

Attach a Guide Board to The Plain/Blank 

Rooring PPC Marketing

You generally can utilize a piece of finished wood for a guide board. Importantly, a guide board should be long enough so that it can reach a couple of inches past the two ends of the blank.

Additionally, you also can adjust the guide board using the kerf line. You should use several sizes of pins or screws to attach it.

Set the Fence

You should set your table saw fence in the right position with the guide board. And then, you slightly press the board from one and to the other boards.  

Cut the Parts

After setting the table saw fence, you should cut the part. Moreover, you need to cut the parts smoothly, then the finished part drops off onto the table. The wastes can be recyclable due to the two pinholes. 

Final Thought:

Thanks for staying with us. I think you have found something remarkable after reading this whole article. 

You know we have listed some popular and simple steps about how to cut a taper on a table saw. Importantly, our steps will help anyone to perform tapering.  

Hopefully, this guide will help you all who want to cut a taper perfectly. But specifically for beginners, it can be an impressive guide to cut a taper on a table saw.   


As a civil engineer and roofer, I love to share the experience that I have gained through the last couple of years. In the roofing industry, practical experience is a very crucial fact that can help you a lot. Hence, I want to help you with my blog.

Write A Comment