Disclosure: As An Amazon Associate, I Earn From Qualifying Purchases

How To Install Zinc Strips On Roof? [Step-By-Step]

Zinc strips are helpful for stopping moss, algae, and fungus growth. These strips are placed on every ridge of the roof. Installing the long-lasting zinc strips is a cost-effective, eco-friendly and easy way to make your roof moss, mold, and fungus-free.

Firstly you have to wash off all the existing moss from the roof by using bleach or brush. Then placing the strips on top of the roof helps to prevent the moss from growing again. Finally set the strips with nails. It is a simple job. I know you can do it yourself. Just follow this article.

Let’s talk about the whole process of how to install zinc strips on the roof?

How To Install Zinc Strips On Roof: Detail Guideline

If you do not install zinc strips, moss, mildew, the fungus can grow on your roof. And these are harmful to the roof. You may require several repairments. So to have a long-lasting roof, you have to install zinc strips on the roof.

Let’s check out some necessary equipment needed for this work. They are:

  • Bleaching solution
  • Brush
  • Ladder
  • Adhesive glue
  • Hammer
  • Nails

Here are some steps which you should follow to finish this job perfectly.

Step 1: Check building codes.

You have to check the building codes of your zone first before doing an installment on the roof. Also, you should take permission from the local building authority. If these types of strip installment are not permissible according to your local construction authority, you can not do the job.

See also  Can You Use A Framing Nailer For Roofing? Answer Here 2021

Step 2: Wear protective clothing.

Before starting your work, you should wear protective gloves, eyewear, and boots. A bleaching solution is used to remove the stuck moss, fungus, and algae from the roof. These bleaching chemicals can cause irritation to your skin so make sure you wear enough protective clothing. And always keep in mind that safety comes first.

Step 3: Remove the existing moss and all.

You can remove the moss with a brush. But if it still won’t come off, hence you may use a bleach solution. And all you need to prepare a bleach solution with 1 cup of water and some bleaching chemical.

After that, pour the bleaching solution into the targeted area and leave it for 10 minutes. Then brush the area once again to remove all of the moss, algae, and fungus.

Step 4: Place the zinc strips on the ridgeline.

A ladder can be used to reach the roof. After reaching one side of the roof, place any of the strips beneath the shingles which cover a roof’s ridge. These strips are put on the ridge because when water flows down from the ridge, the water contains the strip’s chemicals which help to inhibit the growth of moss.

Step 5: Secure the zinc strips.

The strips are attached to the ridge cap with a hammer and nails. To correctly set the strips, use the hammer to drive the nails through the strips. You can also use adhesive glue to protect the nail head from the elements.

Step 6: Inspect the zinc strips once a year.

It’s also part of the job to keep the strips in good condition. These strips are manufactured with a variety of materials and then zinc-coated. As a result, metals can corrode over time. If you don’t keep the strips clean, the covering will quickly wear away, allowing moss to grow again.

See also  Can Metal Roofing Be Installed Over Plywood? Answer Here 2021

As a result, you must check out the strips at least once a year to be sure that the coating is in good condition. If not, replace them right away.

Verdict

Have you figured out what the answer is, right? I honestly hope this is the case. You now understand how to install zinc strips on a roof. So, what are you doing with your time? Now is the time to get down to business.

Zinc strips contain several key ingredients that help to prevent moss growth. The strips not only keep moss at bay, but they also keep mildew and fungus at bay. These factors might cause your roof to become damaged and unsightly. 

The installation of zinc strips on the ridgeline is a basic and straightforward technique. So don’t worry just start your employment by following the steps provided in this article.

Finally, exercise caution when working.

Mehedi, The Founder Of SoftaCode. He Has Been Giving Web Design And Web Marketing Service To The Roofing Contractors During The Last Few Years With A Praiseworthy Success Rate. And Most Importantly, Having A Civil Engineering Degree With 5 Years Of Experience In Constructions Works. So, He Can Easily Grab The Requirements Of The Contractors. Here RoofingHAWK, He Writes Blogs About Roofing Tips, Maintenance & Reviews.

Leave a Comment